Teknik Desain Mekanika

Articles

• Influence of Oxygen Mass Flow Rate Variation on the Performance of a Dual-Chamber RDF-Fueled Incinerator.

  Muhammad Alif Madhani Harahap (Author); I Nyoman Suprapta Winaya, Made Sucipta (Translator)

  • PDF (Indonesian)

• Bioethanol Production Process from Mangrove Fruit

  Kadek Agus Dwicahyana (Author); I Gusti Bagus Wijaya Kusuma, I Putu Lokantara (Translator)

  • PDF (Indonesian)

• A Study on the Biocorrosion Rate of Low Carbon Steel in a Tropical Marine Environment

  Ni Putu Waisna Ariesta Santhi (Author); Tjokorda Gede Tirta Nindhia, Dewa Ngakan Ketut Putra Negara (Translator)

  • PDF (Indonesian)

• Study of Biocorrosion Rate on Copper (Cu) in Tropical Seawater Environment

  Gede Sarma Adi Putra (Author); Tjokorda Gede Tirta Nindhia, Dewa Ngakan Ketut Putra Negara (Translator)

  • PDF (Indonesian)

• The Influence of Potassium Hydroxide (KOH) Concentration Variation on the Efficiency of a Water Scrubber System for the Removal of Ammonia (NH₃) and Hydrogen Sulfide (H₂S)

  I Made Diko Gunung Putra (Author); I Nyoman Suprapta Winaya, I Putu Angga Yuda Pratama (Translator)

  • PDF (Indonesian)

• Effect of Chlorine Solution Concentration Variation on the Effectiveness of a Water Scrubber System in Purifying Flue Gas

  I Dewa Gede Adi Vikramadita (Author); I Nyoman Suprapta Winaya, I Putu Angga Yuda Pratama (Translator)

  • PDF (Indonesian)

• Application of Electrode Tape Using Gun Spot Welding System on a Robot Arm End Effector

  Ade Saepullah (Author); I Nyoman Budiarsa, I Made Astika (Translator)

  • PDF (Indonesian)

• The Effect of Volume Fraction on the Thermal Stability of Green Composites Made from Pineapple Leaf Fibers and Potato Starch Matrix

  Nicholas Andrew Indarto Putra (Author); Cok Istri Putri Kusuma Kencanawati, I Made Astika (Translator)

  • PDF (Indonesian)

• Flash Point Analysis of Nyamplung (Calophyllum inophyllum) Seed Oil

  Ivan Adriansyah (Author); I Gusti Bagus Wijaya Kusuma, I Ketut Gede Wirawan (Translator)

  • PDF (Indonesian)

• Effect of Nozzle Temperature on the Accuracy of 3D Printer Prints Using Recycled RPET Filament

  Arjon (Author); I Made Gatot Karohika, I Made Widiyarta (Translator)

  • PDF (Indonesian)

• Simulation of Structural Analysis on Steering Knuckle of the Energy-Efficient Naga Pasa Evo I Weimana Car Using ANSYS Workbench

  Erend Prasetia (Author); I M. Widiyarta, I Wayan Arya Darma (Translator)

  • PDF (Indonesian)

• Effect of Barrel Temperature Parameters on the Diameter of Polypropylene Filament Produced by 3D Printing Extrusion

  Attila Maesa Jenar (Author); I Made Gatot Karohika, I Made Widiyarta (Translator)

  • PDF (Indonesian)

• Implementation of Solar Panels on the Roof of the Bio Hybrid Obhi-Mec Vehicle for Battery Charging

  Made Naradha Adithya (Author); I Made Widiyarta, Ketut Astawa, I Gusti Agung Kade Suriadi (Translator)

  • PDF (Indonesian)

• Influence of RDF MSW Composition Percentage on Fuel Conversion Rate during Coal Co-Firing in a Dual Fluidized Bed Co-Gasification Reactor

  Yunizill Irfan (Author); I Nyoman Suprapta Winaya, I Wayan Arya Darma (Translator)

  • PDF (Indonesian)